激光打标机

  • 激光打标机
  • 光纤激光打标机
  • co2激光打标机
产品类别

联系人:张经理
电话:186-6127-9724
传真:0510-8307-8366
邮箱:2596366802@aqq.com
地址:无锡市梁溪区会西路30-36号

光纤传输激光焊接机

您当前位置:激光打标机 > 激光打标机 > 激光焊接机 > 光纤连续式激光焊接机 >

光纤传输激光焊接机

激光焊接机报价
手持激光焊接机
 
激光清洗机

  AKM-CPF光纤传输激光焊接机工作原理

  光纤传输激光器通过光纤输出焊接,实现非接触远距离操作,方便与自动化生产线集成;光纤传输激光器采用激光功率实时反馈控制系统。此系统可根据预先设定的激光波形,结合激光功率检测装置,对激光电源实时闭环控制,调节电源的输出电流,激光能量自动保持稳定。激光功率实时反馈控制系统排除因电网波动、水温变化、氙灯老化等问题引起的激光器能量不稳定现象,提高焊接产品的一致性。

  Fiber-optic transmission laser can realize non-contact long-distance operation through fiber output welding, which is convenient to integrate with automatic production line. Fiber-optic transmission laser adopts real-time feedback control system of laser power. According to the pre-set laser waveform, combined with the laser power detection device, the system can control the laser power supply in real-time closed-loop, adjust the output current of the power supply, and keep the laser energy stable automatically. Laser power real-time feedback control system eliminates the instability of laser energy caused by power grid fluctuation, water temperature change, xenon lamp aging, and improves the consistency of welding products.

  光纤传输激光焊接机特点

   具有高的深宽比,焊缝宽度小,热影响区域小,变形小,焊接速度快

   焊缝平整、美观,焊后无需处理或只需简单处理工序

   焊缝质量高,无气孔,可减少和优化母材杂志,组织焊后可细化,焊缝强度、韧性至少相当于甚至超过母材金属

   可控制,聚焦光点小,可高精度定位,易实现自动化

   可实现某些异种材料间的焊接

   可实现点焊、对接焊、叠密封焊等

  Characteristic

  It has high aspect ratio, small weld width, small heat affected area, small deformation and fast welding speed.

  The weld seam is smooth and beautiful. There is no need or simple process after welding.

  With high quality and no pore, the base metal magazine can be reduced and optimized. The structure can be refined after welding. The strength and toughness of the weld are at least equal to or even more than that of the base metal.

  It can be precisely controlled, the focus point is small, the position can be precisely positioned, and the automation can be easily realized.

  Joints can be welded between some dissimilar materials.

  It can realize spot welding, butt welding, overlapping sealing welding, etc.

  光纤传输激光焊接机的应用:

   可应用于金属的连接、密封;适用于各种小型器件的点焊、对接焊、叠焊、密封焊等,例如电感、晶振、硬盘磁头、微型马达、光通讯接头等元器件;现广泛应用于手机通讯、电子元件、眼镜钟表、首饰饰品、精密器械、医疗器械、工艺礼品等行业

  Application:

  It can be used for metal connection and sealing, spot welding, butt welding, overlapping welding and sealing welding of various small devices, such as inductance, crystal oscillator, hard disk magnetic head, micro motor, optical communication joint, etc. It is now widely used in mobile communication, electronic components, glasses and clocks, jewelry, precision instruments, medicine, etc. Medical equipment, craft gifts and other industries.

  Technical parameter

  光纤传输激光焊接机技术参数

激光波长

Laser Wavelength

1064nm 1064nm 1064nm

激光功率

laser power

200W 300W 500W

激光脉冲能量

Laser Pulse Energy

60J 80J 100J

光纤输出数量

Optical Fiber Output Quantit

4路(可选)

4 routes (optional)

4路(可选)

4 routes (optional)

1路

1 route

反馈方式

Feedback mode

电流能量反馈

Current Energy Feedback

电流能量反馈

Current Energy Feedback

电流反馈

Current Energy Feedback

脉冲宽度

pulse width

0.2-15ms 0.2-15ms 0.2-15ms

脉冲频率

Pulse frequenc

0.4-200Hz 0.4-200Hz 1-200Hz

焊点大小

Solder joint siz

0.4-2mm 0.4-2mm 0.4-3mm

激光能量变化率

Laser energy change rat

<±1.5% <±1.5% <±1.5%

主机耗电功率

Main engine power consumption

≤6KW ≤12KW ≤18KW

电力需求

Electricity deman

AC380V±10%/50Hz,30A AC380V±10%/50Hz,40A AC380V±10%/50Hz,50A

冷却方式

Cooling mode

1.5P冷水机

Cooling-water machine

3P冷水机

Cooling-water machine

8P冷水机

Cooling-water machine

主机外形尺寸

(长*宽*高)Size

700*1100*900mm 700*1100*900mm 700*1100*900mm

  光纤传输激光焊接效果

手持激光焊接机报价
手持激光焊接机

金属激光焊接机多少钱?

金属激光焊接机常规价格一般在几十万到上百万之不等,具体还要根据所选的型号配置计算具体价格。。

co2激光打标机的价格大致在多少钱?

一般看功能的,co2激光打标机,激光打标机价格3-5万都有。贵的在5万以上,他们需要配套一整套工艺的,一般需要在设备厂学1年然后让工厂买机器的。。

全自动激光焊接机多少钱一台?

全自动激光焊接机便宜的有4到5万的,不过激光功率很底,只能用来人工补焊,设备配置简单。贵一点有10万左右,大的激光公司一般都在10万以上的。。

不锈钢激光焊接机多少钱一台?

不锈钢激光焊接机现在市面上已经很常见了,所以价格方面不算很贵也就在几万块钱的样子,这得看配置来商讨价格,配置高当然价格贵一点也就无所谓,毕竟性能好嘛! 预计市场价在。

来自【江苏盐城市】的用户评论

我们选择埃克米激光的机子主要是因为它操作简单,我们厂大部分是老师傅,太复杂的根本学不来。埃克米的智能化操作简单易学,而且技术人员也很认真负责地手把手教我们的师傅,。

来自【浙江绍兴市】的用户评论

之前在展会上看到过埃克米激光的打标机现场切割的样品,效果不错,回公司之后又对比了好几家,还是觉得埃克米的好一些。后来我去他们厂里实地考察,出乎我的意料,他们厂区很。

来自【浙江丽水市】的用户评论

我们是服装行业,主要做出口的,所以对工艺要求比较高。在展会上看到埃克米激光的雕花效果,果断购买,现在客户的反馈很好,销量提高了不少。明年还要再上几台机子。。

来自【江苏江阴市】的用户评论

大品牌就是不一样,省事、省时还省力!技术人员很专业,听我们讲完需求后,很快就做好方案,出货也快。关键是无论是售前、售中还是售后,态度也很好。现在已经用上了,运行良。